Tag Archives: raktherm pprc


RAKtherm pprc

Potable cold & hot water supply, indoor installations & central heating systems. 
Thickness of Sizes according to Outer Diameter sizes. PN 20
20mm Diameter: 3.4mm Thickness
25mm Diameter: 4.2mm Thickness
32mm Diameter: 5.4mm Thickness
40mm Diameter: 6.7mm Thickness
50mm Diameter: 8.3mm Thickness
63mm Diameter: 10.5mm Thickness
75mm Diameter: 12.5mm Thickness
90mm Diameter: 15.0mm Thickness

110mm Diameter: 18.3mm Thickness

Contact: +92-321-224897

Call :0322-3540656 , 0333-3645773 , 0300-2856741
Email : arcorporations@gmail.com
Visit : http://www.arcorporation.pk






RAK therm PPRC Pipes & Fitting 

RAKtherm PPRC pipes & fittings are manufactured according to German DIN standards with sizes ranging from 20mm up to 110mm. The outstanding temperature rating up to 950 C and pressure rating up toHigh Level Of Quality system the ideal solution for variety of applications including:

RAKtherm Stabi pipes integrated with aluminum layer are developed for exposed hot & cold water installations. RAKtherm Stabi composite pipes are convenient and reliable due to its superior characteristics in low linear expansion rate which is Less  than 80%




  • Hot and cold potable water piping networks in residential and commercial buildings.
  • Heating systems.
  • Chilled water networks in air conditioning systems, as an effective light weight and corrosion free subtitute for steel pipes.
  • Transport of wide range of chemicals in the industry..
  • Compressed air installations and other industrial applications.
    RAKtherm Standards & Regulations
    RAKtherm Pipes and fittings are produced with the following standards and regulations:


    DIN 8076  


    Standard for testing metal threaded joints.
    DIN 8077  


    Polypropylene (PP) pipe dimensions.
    DIN 8078  


    Polypropylene (PP) pipes; general quality requirements testing & chemical resistance of pipes and fittings.
    DIN 2999  


    Standards for fittings with threaded metallic inserts.


    DIN 16962/Pt1  


    Pipe joint assemblies and fittings for type 1 & 2 polypropylene (PP) pressure pipes; bends produced by segment inserts for butt welding dimensions.
    DIN 16928  


    Installation, pipe and fitting connections.


    DIN 1988 DVGW Code of Practice


    (Drinking water supply systems; materials, components, appliances, design and installation).
    DIN 4109  


    Noise control in buildings.
    DIN 4140  


    Insulation of service installations.
    DVS 2207  


    Welding of thermoplastic pipes and fittings.
    DVS 2208  


    Welding machines & devices for thermoplastic pipes and fittings.
    OHSAS 18001  


    British standard for Health and safety management system.
    BS 6920  


    Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water.
    ISO 9000-2000  


    Quality Management System


    Quality Guarantee
    RAKtherm always maintains the highest standards of quality for its users. To support this, RAKtherm warrants a 10-year guarantee for all its piping network components from the date of purchase. (Please ask your local representative for details)

    Maintaining A High Level Of Quality
    RAKtherm maintains a comprehensive quality control system beginning from designing the required specifications, to control of incoming raw materials processing of the product, packing, storage, shipping to the customer, and finally continuous servicing and support to guarantee that complete total quality is achieved. This is accomplished parallel to the Quality Assurance Program with the objective to ensure that total quality, and not only localized quality is maintained as required. The overall quality system operated and documented by RAKtherm is implemented throughout the plant. The overall system has been designed to exceed requirements stated by national and international authorities and institutions. Regular checks are done by neutral bodies, to further eliminate any chance of quality deviation. This is yet another quality assurance for our customer. A well-designed manufacturing process includes establishing the required specifications, and strictly adhering to them throughout the manufacturing process. This is assured by
    precise machinery, well trained staff, and continuously updated and modernized equipment. Ultrasonic measurement and in-process data recording on the production lines identify real-time changes in the process and assure that any deviations on the quality of the product to the set standard is avoided
Contact: +92-321-2248975




3rd generation technology pipe from petroleum “Poly propolene random co-polymer”.
Made UAE (dubai)

for Hot and cold water and any kind of liquid.
available dia: 20mm to 110mm (equal to 1/2″ to 4″)
PN 10, 20, 25 pipe and PN 25 fittings.

green color

for construction of: banglow, project, plaza, any kind of water supply or food grade liquid supply.
Contact : +92-0321-2248975